Chainsaw Stihl mc 180 - a reliable tool at a glance
Chainsaw Stihl mc 180 - a tool designed for cutting wood in the transverse direction. The equipment belongs to the category of household appliances. The model differs from professional tools in the material of the working bodies and is designed for use periodically, no more than 40 minutes per work cycle.
Saw varieties and specifications
A mixture consisting of the recommended or transmission oil with unleaded AI-92 and AI-95 gasoline should be used for refueling. The ratio is 25 ml of additive per liter of gasoline.
The Stihl 180 chainsaw chain is an endless endless belt of 50 links. Other parameters:
- chain pitch - 3/8 inch;
- groove width - 1.3 cm;
- production material high-carbon steel, chrome-plated steel, victorious soldering.
The working mechanism, the saw headset, includes a tire, a sprocket and an automatic lubrication system.
The chain tensioning system is located on the side, which is convenient. A chain brake is provided.
Depending on the length of the tire and the modernization of the Shtil MC 180 chainsaw, there are several modifications. Saws with a saber length of 35 cm refer to models in the marking of which there are 14, their length in inches is 14. The same equipment for the engine and its parameters, but with a tire length of 40 cm, is called MC 180 16. Chainsaw Stihl mc 180 С- BE instrument of the higher class. It has a 40 cm long tire bed, an easy starting system, and a quick chain tensioning system. Easier access to the air intake filter, a condition that extends the life of the tool.
Compliance with instructions is the basis for long-term operation of the mechanism
An instruction manual is attached to any tool, especially as complex as the Stihl 180 chainsaw. Before making the first start, it is necessary to study the technical manual. This is all the more important if you already have experience with the Druzhba saw. Other layout, chain tensioning, starting conditions and tool adjustments require prior knowledge. There are messages on the forums that the sawman poured a candle at the first start - he pulled the starter repeatedly, you need:
- move the lever to the extreme position;
- pull the starter slowly - 2 times;
- pull sharply and quickly several times.
To avoid problems, gasoline must be worked out to the end, without leaving the tank to "sour" for several days.
The instructions for use give a verbal definition of the markings on the tool body. There is also a description of the parts, the procedure for disassembling the Stihl 180 chainsaw for replacing units, sharpening the chain.
Warnings about the procedure for working with a tool of increased danger, about safe techniques will help to avoid injury. It is important, when changing the chain, be sure to check whether it is recommended by the manufacturer.Inconsistency of units can lead to breakdown, non-compliance with the terms of warranty service.
DIY saw repair
With the advent of the light and convenient Stihl MS 180 chainsaw in the household, it will completely replace the two-handed, bow and even hacksaw. Over time, the chains become dull, the sprockets wear out, the oil supply system is damaged. You can fix some problems yourself. Others require repairs at special service centers.
You can check if there is grease in the reservoir, and if it enters the chain, using a clean sheet of paper. Direct the tire at a sheet of paper, it should have a characteristic trace in the form of an oil strip.
You can repair the saw yourself only after understanding the arrangement of the units and the sequence of operations for removing and restoring or replacing the unit. The instruction manual for the Stihl 180 chainsaw will become a reliable assistant. It is in it that you can find installation techniques and a sequence of repair operations:
- oil supply systems;
- bringing the carburetor into working condition;
- repair or replacement of the oil pump.
In addition, the do-it-yourselfer can shorten the stretched chain and sharpen it.
If the saw chain remains dry during operation or oil leaks, it means that it is necessary to eliminate the malfunction and repair the lubrication system of the Stihl 180 chainsaw. At the same time, the oil lines and the tightness of the connection with the fittings are inspected. Be sure to clean the oil supply filter. If the hoses have minor mechanical damage, the tightness can be restored with a sealant.
The carburetor makes itself felt by the difficulty when starting the saw, the running tool does not gain momentum, stalls when throttled. The reason may be wear of the cuff on the piston, as a result, it sucks in air when discharged. For repair, the carburetor is removed and they get to the cuff on the accelerator, disassembling the unit in the sequence:
- remove the cover with the membrane by unscrewing the screw;
- remove the retaining ring;
- disconnect the air damper, remove the throttle;
- pull out the accelerator with the spring;
- replace the tiny cuffed piston and reassemble the carburetor in reverse order.
Problems may be related to the ignition system. After checking the performance of the candles and cleaning the carbon deposits, adjust the carburetor, supply system and clean the injections. The carburetor is a complex unit and the operation of the chassis depends on its setting. If there is no confidence and skill, it is better to use the services of a specialist. Often, working on low-quality gasoline, with not recommended oil, is the root cause of all problems.
To help the master, there is information on the resources on how to repair the Stihl 180 chainsaw with your own hands, for example, the video will show the disassembly sequence.
For diagnostics of the lubrication system, see here:
Saw chain features
The saw's working mechanism is a chain. Saw chains are manufactured using a special technology:
- The cutting element is made of high carbon steel, and the use of chrome plating or applying a victor layer to the cutter. The more complex the manufacturing technology, the higher the cost of the chain.
- Hinge holes are sanded to reduce friction and extend service life.
- Rivets are used only hardened using a special technology.
- The teeth are marked with marks that can be used to determine wear and perform uniform sharpening.
- After connecting the links into a chain, the product is stretched to ensure dimensional stability during operation.
Intelligent automatic chain lubrication system extends service life. New saws must be selected according to the characteristics specified in the manual for the Stihl 180 chainsaw.
You need to know that chains with victorious surfacing are 3-5 times more expensive than ordinary ones, but it is impossible to sharpen them with your own hands when repairing a Stihl 180 chainsaw. This tool is used more often by employees of the Ministry of Emergencies.
For a long maintenance-free period, use the oil recommended by the tool manufacturer. A special mineral composition is used to prevent chain pitching. It is unacceptable to use oil intended for addition to gasoline for Stihl saws.
It is often asked whether it is possible to make longitudinal cuts with a Stihl 180 saw. The saw power allows you to cut wood only across the grain.
For the most part, reviews of Calm saws are good. There are complaints about the insufficient power of the instrument. It is necessary to choose an assistant for the tasks. The light and affordable chainsaw Stihl 180 is designed for periodic use. There are special products for felling and cutting wood. At home, this option is not justified. The tool is much heavier and it is not for them to saw through small planks.
The price of the Stihl MS 180 chainsaw is significantly different. The most inexpensive basic model of the usual configuration. The cost of the device depends on the country of manufacture. A German or American product is more expensive than a Chinese one for obvious reasons.