Notes to poultry farmers - how to make a drinker for chickens with your own hands

Tell me how to make a drinker for chickens with your own hands? We had a store drinker, served faithfully for two years. Until the hurricane happened - there was such a strong wind that it carried away everything that was not attached. I wanted to buy a new one in the store, but now is not the season, there is not much choice, and what was there did not inspire much confidence. I have poured water into the old bowl for the bird, but this is not very convenient, you have to frequently add water. What can you make a homemade drinker from?

In addition to a varied and nutrient-rich diet, chickens should always have water, both summer and winter. Therefore, drinkers must be placed next to the feeder and make sure that the liquid in them does not end. You can buy such devices in the store, but it will be cheaper to make them, because there is nothing complicated in how to make a drinker for chickens with your own hands. Almost any available means can serve as material. And the size of the drinker should correspond to the number of birds in the subsidiary farm. The more chickens, the larger the dishes should be, or they put several drinkers.

You can determine the volume of water based on the general rule: each adult needs 500 ml per day.

What should be a drinking bowl for a bird

Small chickens, especially if there are not many of them, need small containers so that the chicken does not get wet or sick. The older the chickens become and the more of them, the more voluminous drinkers are placed.

In addition, utensils for providing birds with drinking water must meet the following requirements:

Stability. Birds can tip over the lightweight container and run out of water. It is especially important to have a reliable drinker in the winter, otherwise the spilled water will wet the bedding.
Practicality. If it is possible to provide automatic filling with water, this is ideal. With manual filling, the drinker must be freely accessible.
Safety and durability. Even if the chickens accidentally overturn the container, it should remain intact. The material, which shatters into fragments from the impact, is not used - they can injure both a bird and a person.

It is best to make a closed drinker to prevent dirt and droppings from entering the water. This can provoke diseases in poultry house.

How to make a drinker for chickens with your own hands - simple options

A stable and convenient water container for everyone can be made from unnecessary containers or leftover material after home renovation. For example, improve a little:

Sewer pipe. Put a plug on one side so that water does not pour out. On the reverse side - install an elbow of the appropriate diameter through which water will be poured. And so that the chickens can drink, cut holes in the upper part every 25 cm. You can install such a drinker on wooden stands.
The bucket can be old, but whole, or with small holes at the bottom or at the bottom. Add new holes to them by drilling them - about 6 pieces are enough. Insert into each nipple, cover and hang in the chicken coop. The most convenient thing: water will never spill, but will go to the chicken only when it touches the nipple with its beak.
A large canister. It must be washed well and put, tightening the lid tightly. Cut holes on both sides in the upper part of the rectangular shape.

Do-it-yourself autonomous drinking bowl for chickens