Review of chainsaws of the best models of the Makita brand
Makita was founded in 1915 and is a leader in construction tools for working with concrete, wood and other materials. All products have a high level of quality and meet all European standards, including Makita chainsaws. Chainsaws are manufactured with different configurations and purposes (gardening, felling). They have many systems and functions that allow you to work with the tool comfortably and safely, such as vibration damping and automatic brakes.
Makita EA3202S40B
Tire length 40 cm or 16 inches. For the convenience of filling oil and fuel tanks, they are equipped with a wide neck. Starting and stopping is carried out by one lever with three positions: cold start, run and stop. At the same time, protection against accidental launch has been added.
So that the process of working with the tool does not get tired too quickly, an effective anti-vibration system is installed in the Makit model EA3202S40B chainsaw, consisting of four steel damping springs.
All parts and the body are balanced so that the weight is evenly distributed in the hands. The handles are ergonomically designed for a firm grip and control of the saw. The tool comes with a chain, tire, case and combination wrench.
Advantages of the Makita chainsaw EA3202S40B version:
- the body is made and durable material, thanks to which it has a long service life:
- the chain is pulled from the side;
- it is possible to adjust the intensity of oil supply to the chain;
- inertial snap brake;
- light weight;
- convenient location of the air filter, if necessary, it can be easily taken out and cleaned or replaced;
- simple operation and safe operation.
The disadvantage is the lack of a chain tension function without using a special key, as well as a very sensitive Stop button. The drive sprocket is fully welded to the clutch drum. In the event of a breakdown, you will have to replace everything together.
It is recommended to use AI-92 gasoline as fuel for Makita chain saws.
Makita EA3203S40B
The Makita EA3203S40B chainsaw is a lightweight and ergonomic garden saw with a well thought-out body and low vibration. Thanks to this, the tool can be used for a long time. Recommended for use in garden work, for cutting small trees and pruning branches, and can also be used in construction. The chainsaw is equipped with a 32 cc two-stroke gasoline engine3 and a power of 1.35 kW or 1.81 liters. from.
The length of the bus is the same as that of the previous model - 40 cm. The switch has 3 positions - cold start, run and stop. Chain lubrication is supplied automatically. The electronic ignition system and primer allow you to quickly start the chainsaw, even after long periods of inactivity, and the MPI technology helps to restart it. The Safety Matik (chain brake) stops the chain instantly.There is also a single speed support function and protection against accidental start.
Unlike model EA3202, this one has the function of setting and tensioning the saw chain without a special wrench.
Fuel and oil tank caps have S-shaped handles for easier unscrewing. This version of the Makita chainsaw comes with a cover, a saw chain, and a combination wrench and bar.
Comparison table with the technical characteristics of Makita brand chainsaws of versions EA3202S40B and EA3203S40B:
| EA3202S40B | EA3203S40B | |
| power, kWt | 1,35 | 1,35 |
| Engine volume, cm3 | 32 | 32 |
| Chain speed, rpm | 12800 | 12800 |
| Oil tank volume, ml | 280 | 280 |
| Fuel tank volume, ml | 400 | 400 |
| Constant speed support | + | + |
| Keyless saw chain tensioning and setting | — | + |
| Fuel consumption, kg / h | 0,68 | 0,68 |
| Noise level, dB | 111,5 | 111,5 |
| Dimensions, cm (HxWxD) | 26x25x75 | 26x25x75 |
| Weight, kg (without consumables, bar and chain) | 4 | 4,1 |
It is not recommended to cut trees with a diameter of more than 35 cm with this version of the chainsaw.
Makita DCS34 and DCS4610
The DCS34 chain saw is used for sawing logs and trimming knots or branches when shaping hedge Location on. Engine power 1.3 kW. Steel damping springs significantly reduce vibration when working with a Makita DCS34 chainsaw. The chain is automatically lubricated. For the safety of the user, an inertia brake function is built into the saw chain and hand guards are installed. Electronic ignition together with a quick start system help to quickly and easily start the tool.
The Makita DCS4610 chainsaw has a similar design and function, but is equipped with a more powerful 1.7 kW motor. Both tools can be fitted with 35 and 40 cm tires.
Technical data sheet for Makita DCS34 and DCS4610 chainsaws:
| DCS34 | DCS4610 | |
| power, kWt | 1,3 | 1,7 |
| Engine volume, cm3 | 33 | 45,1 |
| Chain speed, rpm | 12200 | 12600 |
| Oil tank volume, ml | 250 | 250 |
| Fuel tank volume, ml | 370 | 370 |
| Fuel consumption, kg / h | 0,71 | 0,94 |
| Noise level, dB | 105 | 109,6 |
| Weight, kg (without consumables, bar and chain) | 4,7 | 4,75 |
The price of Makit chainsaws is influenced by their configuration (the presence of additional functions, systems) and power, since it is from it that the performance of the chain saw primarily depends.