Laminate walkway: high quality and installation features

One of the best solutions for a suburban area is a flagstone track in a suitable shade and texture. The selection takes into account the nuances of the surrounding buildings and landscape. This material is distinguished by its striking decorative and physical properties. When choosing, it is important to consider a number of important nuances.

A limestone walkway is a great solution

Tile is a wild stone that is suitable for organizing a site or decorative covering. It is distinguished by its affordable cost and resistance to external influences. An important advantage - the material can be easily processed using grinders... As a result, you can set the required dimensions for individual elements.

When organizing a limestone path, you get a number of positive aspects:

• high decorative characteristics;
• a wide range of products;
• uniformity of the outer coating;
• low porosity, due to which the surface does not crumble;
• frequent cleaning is not required, since the surface does not accumulate dirt;
• resistance to high humidity and water;
• resistance to chemical components;
• high strength characteristics;
• environmental Safety;
• even after several years of operation, the original color remains;
• high loads are allowed, including vehicle movement.

You don't have to choose the most expensive stone. It is enough to focus on quality flagstone for paving paths. It must have suitable decorative characteristics, meet technical requirements and be easy to install.

How to choose the right stone

If you decide to organize your own limestone paths, first of all you need to choose the right material. Its characteristics and features of operation are taken into account.

First of all, pay attention to the following parameters:

1. Thickness. The optimum thickness is 40 mm or more. If the slabs are less than 4 cm, it is best to lay them on a pre-prepared concrete base. The best option is flagstone with a thickness of 40 to 60 mm. Such a stone will adhere well even with a dry installation method.
2. Texture. If you plan to organize sites and paths for regular use, you should focus on a flat surface. If it is grooved and grooved, you can damage the coating with frequent use.
3. Amount. First, you need to make calculations of the required amount of material. One ton is enough for laying 10 sq. m. tracks. In this case, we are talking about a stone with a thickness of 40-60 mm.
4. Cost. You can choose a simple and inexpensive cover. Variants with high decorative performance are available. The choice depends on the available budget and future use.
5. Color selection. Stone of yellowish tones is best used in places with minimal traffic or for facing the facade. The most durable materials are muted shades of brown, gray, burgundy and greenish tones.
6. Edge and dimensions. Slabs 30-35 cm in size are optimal for paving paths. They are easy to lay. If you want to emphasize the natural landscape, you can choose uneven and jagged edges. A stone with smooth edges looks more accurate. It creates a stable surface.

Having chosen the appropriate parameters, you can determine the texture and color scheme.In this case, you can choose a material that will be suitable both in appearance and in physical properties. This is the optimal solution for a suburban area of ​​any size, including a small area of ​​several hundred square meters.

The right choice of limestone has versatile properties. It has a smooth and rough surface. As a result, the coating does not slip even after rain or snow. Over time, the decorative appeal remains the same.

Features of laying limestone

A do-it-yourself limestone garden path is laid in compliance with a certain technology. First you need to create a project that takes into account the configuration and dimensions. It is important to avoid high climbs and descents. If there is an elevation on the site, it is better to provide steps. In the next step, the pillow is laid. This is the main point of the quality of the future design.

Measurements are taken, pegs are installed. Then a string is pulled through them for a reference point. It is important to monitor the evenness of the future canvas. With the help of a shovel and a wheelbarrow, it is necessary to dig a depression from 30 cm. The soil is taken to another place. If you plan to lay the stone pointwise by one step, dug out recesses in the previously marked places. In the rest of the territory, the soil remains intact.

The edges of the trench are reinforced with formworkwhich is installed along the edges. For this, boards or plywood are used. This avoids distortions and keeps the laying line precisely.

A pillow is placed on the bottom. Broken stone is distinguished as the best material. You can also use broken brick or rubble. The resulting layer is tamped. When finished, the height of the pillow is 10-30 cm.

The outer layer is laid. The carrier layer is covered with geotextile so that weeds do not break through from below. Fine sand is poured onto the fabric. Around the edges, you can pour a concrete curb or install a curbstone.

The slab is laid directly on the sand. If there is space between the individual edges, sand is also poured into it. For greater reliability, the stone can be laid on a cement mortar. To do this, make a sand bed with a height of 2-3 cm and lay the mortar in a layer of 3-5 cm. The stone from the lower side is moistened in liquid cement mortar and laid on top. You need to press it well for a tight fix.

When choosing a limestone path, you can get a harmonious and beautiful landscape. To do this, it is important to choose the right material and lay it correctly. As a result, the approaches to the house and garden paths along their entire length are beautifully designed. This allows you to keep the lawns and green spaces intact, to emphasize the general style and color scheme of buildings.

Laying a limestone track with your own hands - video