Waste incinerator in the country from a barrel

The advantage of purchasing such a device is the absence of capital investments and operating costs when calling for special vehicles and using landfills. Therefore, a garbage incinerator in the country is a manufactured and demanded product also where self-disposal of waste is prohibited. But considerations of this kind will be valid only if the concentration of harmful substances when ejecting a summer cottage does not exceed the permissible concentration of emissions from a garbage plant. Consider how the age of high technologies can please us in this area, and what is available to do on your own. For the wisdom of life suggests: a high price is not a guarantee of equipment with innovations.

DIY garbage incinerator - "modernized barrel"

A barrel for burning garbage with your own hands is, at first glance, not the most presentable structure. But it can be made graceful and, most importantly, useful. Something like this beautiful design can end up if you follow all the instructions!

When making this design with your own hands, you do not need to have a professional education - anyone who wants to cope with it.

Preparatory activities

If we talk about the materials, it seems that there are too many of them. But it is not so.

What (besides the barrel, of course) we will need:

1. A 5 meter metal profile (we will cut it into 5 identical pieces).
2. Steel rod 5 meters long.
3. 2 loops.
4. A square meter of welded mesh.
5. Spark arrestor (the diameter of the fasteners should be 11.5 centimeters).
6. 0.2 kg of wire.
7. Tin pipe 1.5 meters long and 11.5 cm in diameter.
8. Degreasing agent.
9. The handle on which the wood nozzle is worn.
10. 6 pieces of bolts and 6 pieces of nuts.
11. Electric jigsaw and metal files.
12. 20 self-tapping screws with a wide cap.
13. Drill for metal with a diameter of 1.2 cm.
14. Grinder and circles to it (for sandpaper and for metal).
15. Fire resistant paint.
16. Brushes or spray.
17. Electric drill.

After preparing everything you need, it's time to start building a homemade garden oven for burning garbage.

Step by step assembly of the oven

Work process:

1. We cut out the door. For the sake of this, let's draw a line on the bottom to which it will attach. We carefully cut the line with a grinder so as not to touch it to the side walls.
2. We make several holes in the door through which air will enter. They need to be done at the bottom, the order is not important.
3. If necessary, we use a grinder with an installed sanding disc to clean the barrel from paint or rust.
4. We begin the construction of the goats. To do this, we use 5 pieces of metal profile. The trestles consist of 2 crosspieces, which are connected by a rod. The profile is connected only at right angles, so we make 2 holes in each and tighten with bolts.
5. We start degreasing and staining the barrel, while not forgetting about the goats. These procedures are best performed in an unassembled state. We cover each element in several layers of paint, after the layer we wait for the coating to dry completely.
6. Let's start designing the goats after 24 hours from painting. Place washers under the nuts and securely tighten each element of the barrel.
7. Let's start installing the hinges and handles. For this we use screwdriver and prepared screws.
8. We make a hole for the chimney.At the top of the structure, draw a circle with a radius of 5.75 cm.
9. Then we go through this circle with a grinder and get “petals”. Ultimately about 10 pieces should come out. We bend each petal upwards - this way they will be installed vertically.
10. We install a chimney for a stove that burns garbage in the country. We put it in this way on the petals so that they turn out to be on the inside. Then, in 3-4 places, we begin to screw the pipe to the petals with the help of self-tapping screws, so that it does not then tear it off.
11. We begin the installation of the grate.
12. We put the lid on. We attach it with clamps.

It is better to install the hinges with a partner, because the door will surely fall through.

Waste incinerator in the country from manufacturers

Many types of waste incinerators in the country are made in production. Particularly inquisitive and skillful owners of summer cottages prefer to make them on their own. This saves you a decent amount of money.

The cost of the purchased stove is about 250,000 rubles. And we can assume that it is still inexpensive! The main reason for this challenging price tag will be complex, costly and volatile electromechanics. Its resource is limited - about once every five years, it will have to be overhauled at the price of one third of the purchase of the latest device.

To power the burner, fuel gas is also needed; its costs are driven into the monthly fee at the factory. Discounts and also subsidies are not provided by the state, because self-disposal of garbage is not legal. Ash from boilers is unsuitable for fertilizing the soil, because it contains many harmful substances, so it will also have to be handed over for disposal.

And although in our country with the elimination of garbage at summer cottages, not everything is as transparent as we would like it to be, the assembly or purchase of a waste incinerator will be a necessity. Their presence on your homestead will ensure a more comfortable stay, and the environment will thank you.

How to make a garbage incinerator in the country from an old barrel - video