Pumping station Dzhileks will help out the private owner
The Jileks pumping station is the brainchild of a Russian manufacturer and its business card. Reliable and easy-to-repair equipment is becoming the leader in demand. Adaptation to domestic conditions and price are of no small importance. Various equipment and materials of manufacture are used in production. Of the entire product line, the greatest demand is for pumping stations Jileks Jumbo of different performance.
Read also the article: pumping station for a private house wiring diagram!
The device and principle of operation of the pumping station
- surface pump;
- hydraulic tank;
- automation system.
The equipment in question is capable of pumping turbid water, in contrast to the models of well-known manufacturers. The self-priming pump with a built-in ejector lifts water from a depth of up to 9 m. A filter is also installed on the head. Reinforced engine, automatic control of switching on, level and pressure control is provided. The Jileks pumping station is hermetically sealed, the engine is waterproof. Impeller housing material:
- stainless steel - "N";
- cast iron - "Ch";
- glass-filled propylene "P".
The suction pipe of the pump descends into the water layer 30 cm above the lower horizon. A check valve is installed on the pump nozzle and the pipe is always under the fill. The pump turns on when there is insufficient pressure in the accumulator. The pressure range is set at the factory. The tank is diaphragm, two-chamber, the back pressure is created by air. As a result, the Jumbo pumping station supplies water to several points, depending on the capacity.
Advantages of Jileks station:
- small starting currents;
- no water hammer when the pump is turned on;
- protection against voltage surges;
- low mechanical stress;
- elimination of dry running.
The disadvantage is the complex installation, and during repairs, a complete disassembly of the pump is often required. A powerful pump with a capacity of 70 l / min is noisy, users recommend soundproofing the room.
Varieties of water supply installations
All stations are distinguished by the maximum productivity and head of the installation. Operating parameters differ from the maximum by 20-30%. It is important to know this when choosing equipment.
Let's decipher the marking using the example of one installation - NS Jumbo 60/35 Ch-24:
- НС - pumping station;
- series - Jumbo;
- productivity - 60 l / min
- injection distance 35 m, or into a tank at a height of 3.5 m.
- body - cast iron;
- the capacity of the accumulator is 24 liters.
The considered pumping station Jileks is popular with summer residents. The installation is economical, consumes 600 watts. Its capacity is enough to provide for a family of 4 people, the cost is about 6 thousand rubles. But there is not enough water if it is necessary to organize watering of the garden.
Pumping station Dzhileks Jumbo 70 50n 50n represents a more powerful installation that meets the needs of a rural backyard. This model was named Jileks DOM. The body can be made of stainless steel, plastic or cast iron. Users claim that fiberglass is no less durable material. The DOM model is distinguished by a 50 l battery tank, increased power - 1100 watts and a powerful controller that ensures the system is operational.
Pumping station Jileks Jumbo 50/28 is a baby, ideal for organizing water supply for small families. But a weak pump cannot work for a long period, it is not intended for irrigation. The station costs only 3600 rubles.
The manufacturer provides users with a wide choice. Basically this is a kind of Jumbo stations:
- 75 n 5 n,
- 75 n 24 n,
- 70/50 n-50 with a horizontal tank and others.
Difficulties in operating equipment
The system assembled according to all the rules will work reliably. And in order to carry out the installation in accordance with the requirements, you need to study the instructions for the Jileks pumping station. Recommendations for connecting equipment will help to correctly install the station:
- The intake pipe installed in the water intake should not touch the sand cushion, hang over it at a certain distance. The pipe rises to the pump smoothly, without sagging, in which air can accumulate.
- The head with an ejector is covered with a sand net. A check valve is mounted at the top. All joints on the suction line must be tight.
- The discharge pipe is connected to the receiver
- A socket is installed, always with grounding.
Automation devices are configured at the factory stand, if necessary, change the parameters, it is better to contact the specialists.
The operating instructions for the Jileks pumping station describe the main malfunctions and how to eliminate them.
If the pump is running and no water is flowing, the reason is air entering the suction system. It is necessary to check if the check valve is leaking, and if there is water in the well. Often, air is sucked in through leaks in the joints.
If water enters the system in jerks, the pump often turns on, perhaps a diaphragm has broken or a relay has failed. Due to a relay malfunction, the pump may not turn off at all.
If a pump does not turn on - check the health of the outlet, the presence of energy in the network. In the instructions for the Jileks pumping station, you can find the answer to many questions. It also describes self-repair and recommendations to contact the nearest service center.
It is not difficult to find spare parts for pumping stations of Jileks. And their cost is not high. If repairs are made in a workshop, for work, taking into account the complexity, they will take 500-600 rubles. But spare parts should be purchased additionally. A battery tank can cost from 900 rubles, a membrane - 400, and a pressure switch above 600. All units are sold in specialized stores or repair shops.
User reviews
If you read the many user reviews, you can create a resume:
- if the pumping station "Vilo" or "Grundfos" is out of order, the repair will cost more than the new Jilex;
- patiently pumps turbid water;
- the engine does not burn out during voltage drops;
- good value for money.
It is noted that there are no questions about the pumping station for the first year. Most often, membranes and pressure switches fail. The stations installed by the service specialists work better.