How to make a hiller from an old bicycle with your own hands for work on the site
Summer residents who grow potatoes and vegetables know how difficult and long it is to spud bushes with a hoe. To simplify your task, you can make a bicycle hiller with your own hands.
Principle of operation
Should be found:
- Used bike frame (minimum wheel diameter 26 inches).
- Plow. You can find it in the store or make it yourself.
- Drawing of a hiller for potatoes.
- Wrenches for work.
In Europe, carrots and potatoes began to be planted in the mid-1500s.
The main part of the structure, which goes into the ground by about 10 cm, should be rounded or sharpened for best effect. The blades should be fixed with an angle so that the earth is dug to the required width, filling the potato beds.
All that remains is to attach the blade to the bike frame. The steering wheel allows you to adjust the design. A wheel moving in front of the gardener helps to move quickly.
All work on hilling potatoes is carried out like this:
- The equipment should be buried in the ground.
- Then start moving the structure with the wheel.
- If you need to change the orientation, you just need to turn the steering wheel in the desired direction.
Hilling potatoes is faster and easier than manually hooking. You don't need to process all the bushes individually. Free time is saved at the same time. The treatment is suitable for potato plantations planted in a row or by a ridge method.
The comb method of planting vegetables was invented in Holland, which is why it got the name "Dutch".
How to design a bicycle hiller with your own hands
How to build a hiller with your own hands is described below. The owner must have the right tools and a commitment to get the job done quickly.
Materials and tools
To make a hiller out of a bicycle with your own hands, you need to deal with a cultivator. The part can be borrowed from the tractor, or you can weld it yourself, fixing the blades perpendicularly. You will also need a bicycle frame with a front wheel.
It is recommended to immediately remove the tire and tube. The wheel will travel faster on the surface and the fixture will be easier to control. Then you need to attach the handlebar to the frame.
Additionally, you should find wrenches and bicycle wrenches.
Step by step manufacturing process
Making a bicycle hiller with your own hands consists of several steps.
Do not forget about the safe work.
The first step is preparation. The first step is to deal with the bike frame. The rear wheel, pedals and harness must be removed. The steering wheel just needs to be disconnected. All rubber must be removed from the front wheel. Now follows with the cultivator to replace the rear wheel.
A cultivator for a manual hiller is easily done independently. You will need a sheet of metal and welding equipment.
The second step is to prepare the unit. You need to cut the mount and leave only the frame in the shape of a triangle. In the place where the rear wheel is cut next to the pedal mount, a cultivator section must be attached. Tighten the nuts with a wrench of the correct size (two wrenches are required: the first will support the bolt, the second will tighten the nuts).
A potato planter will help automate the planting of potatoes. If a lot of potatoes are planted in the area, you can make a potato digger to quickly harvest. The device can be designed by hand.
The extension of the section needs to be adjusted for comfortable control. The handlebars are attached to where the saddle used to be. The length is adjustable according to the person's height.
The front fork must be firmly attached or welded. It shouldn't spin or dangle. The excavator width should be 2/3 of the row spacing. The blades should be placed at an acute angle so that the ground will grip well.
You can fasten the belt on the front, completing the task with a partner. One pulls the belt, the other regulates movement. You can fix the weight, and then the structure will cut deeper into the ground.
Other types and options of devices
You can purchase the assembled structure, but it's easier to do it yourself.
There are many options for homemade designs:
- An old stroller.
- Used car.
- Tricycle.
- Pipes.
For any manual hiller, the frame and wheel are taken as the basis. It is worth fixing the cultivator section there. You can control it with the handles.
In order to make a hiller from a children's tricycle, the seat and front wheel must be removed. A finished tractor cultivator is not suitable here. It is necessary to weld the blades on the inside near the wheels. This will allow you to move the structure strictly along the row. A wheelchair hiller is also made.
The most popular option for making a homemade hand cultivator from an old bicycle was shown in this manual. The device can make life easier for the owner, especially if you regularly monitor the sharpness of the nozzle. Even one worker can cope with the task.