Why the Interskol plane meets the requirements of the joiner
It is impossible to give a flat plane to wooden products without removing a thin layer of wood. The plane Interskol is one of the woodworking tools. It can be manual or use an electric cutter. Of course, the power tool has a higher productivity, while leaving the carpenter in control of the process. But hand tools are also used by cabinetmakers.
One third of professional carpenters working with hand tools have hand injuries. Do not forget about the danger of contact with the open cutting surface of the tool when the safety guard is on.
Functional features of planers
Electric planers are equipped with a belt drive, which must be checked and tightened loose belts. It is forbidden to work without a cover with a belt drive.
In electric models of Interskol hand planers, the function of a knife is performed by an electric cutter. This tool does not care about the direction of machining, it smooths the plane along and across the grain. This tool is called manual, because the direction is given by the person holding the handles. The electric drive can be of different capacities. The working width and planing depth vary. It may be necessary to choose a groove during the planing process, such a function is present in Interskol planers. In addition, the tool is selected according to the parameters:
- adjustable cutter lowering height and chip thickness;
- with two handles and with cutter blocking;
- with directional convenient chip removal.
It is taken into account whether it is possible to use the tool on a fixed platform. It is attractive if the start is carried out by turning a key using a soft start.
Prices for hand-held electric planers Interskol depend on the series of the tool, its functional features and the quality of the components used. For the home model, a narrower cutter is used, respectively, the power and cost of the planer are reduced.
Woodworking tool P 110 1100 M
This is a plane with a cutting surface of 110 mm, which allows you to process shaped workpieces 100 mm wide without ragged edges in one pass. The power consumption of the Interskol R 110 1100 M planer is 1.1 kW, the letter M means that the model has been improved.
The changes affected the width of the knife. Its increase doubled labor productivity, since a standard block is processed in one pass. The planer has become heavier, and this allows you to lie flat on the work surface.Interskol 110 mm planer knives made of special steel extended the service life before sharpening the tool. The blocking button for switching on the tool is applied.
Check the cleanliness of the workplace before work. Remove all metal objects from the work area. Before processing, inspect used boards for nails. Wear safety glasses.
The tool works in any position, even with the knives up. Therefore, it is convenient to handle a bulky structure. The planer is well centered and has a rubberized handle that insulates the worker.
Technical indicators:
- consumed energy - 1.1 kW / h;
- mains voltage - 220 V;
- knife width - 110 mm;
- maximum chip thickness - 3 mm.
The price of the planer Interskol R 102 1100 M in different retail chains is from 5 to 6 thousand rubles.
Description of the plane model Р102 1100 ЭМ
A rare type of tool in modern woodworking is the Interskol plane R 102 1100 EM. It is used for machining shaped parts less than 10 cm wide. The tool has a number of convenient functions. The engine is equipped with a collector engine, and graphite brushes are used. At idle, it develops 11,000 rpm, which ensures a clean cut. There is a regulator knob that sets in microns the depth of lowering of the knives up to 2.5 mm. The start of the Interskol electric plane is not a jerk, but smooth, which makes the work safer. Electronic control provides engine shutdown if overload is allowed and setting of stable operation mode. The rebate stop can be used to chamfer 15 mm deep.
Do not start up the new machine until the operating instructions for the device have been studied. The warranty does not cover damage caused by failure to follow instructions.
The sawdust discharge can be directed to both sides. Non-working knives are covered with a special cover. A button is provided that blocks the accidental start of the device. The weight of the device is 3.8 kg. The average cost is 5 thousand rubles.
Model of woodworking tools P 82 710
The hand planer Interskol R 82 710 is often used with installation on the machine, so that the processed material passes over the cutting plate with its entire plane.
Options:
- consumed energy - 710 kW / h;
- x / x speed - 14500 rpm;
- cutting segment length - 8.2 cm;
- depth - up to 2 mm.
The tool uses carbide knives. With the help of electronic control, soft start, block overload and stable operation are performed. The planer turns into a planer using the included stand. The cost of the device is 3400 rubles.
Powerful plane Р 110 2000М
The plane Interskol R 110 2000M is more likely to be a semi-planer with an elongated platform and a cut depth in one pass. The device can create a flat profile for uneven boards, aligning them with a thickness gauge. A powerful 2 kW drive handles hardwood. The plane has navigation restrictions on parallelism and tilt angle.
Using an inverted plane, a woodworking machine is obtained. A well-designed bed for safe working is available on request. It is also possible to equip the machine with dust and shavings suction by connecting a branch pipe to an industrial vacuum cleaner.
Smooth starting and motor overheating protection ensure safety. There are tools for chamfering, choosing a quarter, sharpening knives. The knives in the tool are double-edged, which allows you to use one consumable for two periods before sharpening. Rubberized handles reduce vibration and create a comfortable grip.
Technical characteristics of the machine:
- supply network - single-phase, 220 V;
- energy consumption - 2000 W;
- angular speed of the cutter x / x - 15000 rpm;
- chip thickness - no more than 3.5 mm;
- the depth of the longitudinal groove - no more than 16 mm;
- overload protection - no;
- total weight - 7.3 kg.
The cost of the device is on average 10 thousand rubles. Manufacturer's warranty for 24 months.