Convenient water heater Termeks for household comfort

It is proposed to change a complex life without hot water with the help of the Termeks water heater. Of course, you can use a gas water heater or a wood-fired hot water boiler, but often electricity is the only source of energy. In the line of hot water products of the Thermex concern, products are distinguished by a variety of models, affordable prices and high quality.

Why Thermex water heaters are popular

A specific feature of the concern is its narrow specialization. Since its inception in 1949, the Italian company Thermex has been producing exclusively water heating equipment. Products are constantly being improved due to the professionalism of the developers. The concern has not only its own production, it includes:

• scientific laboratory;
• own design bureau;
• production of component parts;
• plant for the provision of electrical appliances of its own production;
• assembly plant water heaters Termeks.

If the product is bought in 160 countries, assembly plants are located in different countries, including St. Petersburg, the consumption of products increases annually - is this not a guarantee of a worthy choice of a Termes water heater from a wide range of similar products? The concern is one of the three world leaders with an annual production volume of 2 million units.

Varieties of water heaters, their device

The range of devices is represented by three branches:

• storage electric water heaters various volumes, power and application of equipment;
• flowing devices with a variety of power consumption, water consumption, regulation;
• storage and flowing water heaters.

Boiler represents a sophisticated thermostat system with safe operation.

Each Termeks water heater has an instruction manual, which describes in detail the technical device of the device and the rules for its safe operation. Instructions are required to correctly install and turn on a complex device, detect malfunctions and take measures to eliminate them. A separate manual is developed for each type and series of water heaters.

When replacing heating elements, it is better to replace the heating element with a copper shell with a steel one. It overgrows less, scale is easier to remove.

The instruction manual for the Termex water heater includes:

• information about the configuration and technical characteristics of units;
• water heater installation manual;
• maintenance of the device during operation, prevention and repair;
• safety measures during the operation of the device;
• disposal of used parts.

The manual contains symbols and names of control panel buttons in Russian. Provides information regarding warranty service. The company provides a one-year warranty for electrical equipment and up to 94 months for body and tank.

The Termex storage water heaters are divided into 2 types according to the method of corrosion protection of the tank walls:

1. The food grade stainless steel tank has a long service life and easy maintenance. Er marking.
2. The inner surface is covered with bioglass porcelain enamel, made according to the special technology of the Oxygen Free System, application of the enamel coating in an inert gas atmosphere. The coating is resistant, does not deteriorate from sudden changes in temperature. If marking.

The procedure for connecting storage water heaters

To install the boiler, you must choose a place where hot water is required more often, and the wiring to the tapping point will be short. Each model is designed for horizontal or vertical installation, as indicated in the passport and marking. It is better to entrust the fastening of the structure to the wall, setting the operating modes, and competently connecting to the electrical network to specialists.

How to connect a Termex water heater with your own hands? In this case, you must strictly follow the instructions for connecting the device. You must have:

• water heater Thermex;
• anchor fasteners;
• pipes for wiring;
• flanges, pipes, fasteners.

Fix the water heater on the wall according to the diagram. In this case, it should be taken into account that the supports on the water heaters are not placed horizontally and vertically, but are commensurate with the center of gravity of the device. Therefore, it is necessary to drill holes for the anchor exactly in accordance with the heels of the tank. After fixing the main structure on the wall, they begin to strap the water heater with water wiring. Particular attention should be paid to the condition of electrical networks. how connect a water heater Termeks to the network, seen in the diagram. A separate line is required for the heater, and the socket must be on the side of the device.

Until the tank is completely filled with water, keep the plug of the device sealed so as not to accidentally turn it on dry. The first connection to the network is made after filling the container and checking the tightness of the connections. The tank is considered full when water flows out of the drain under pressure.

The water heater is supplied with a cord with a plug providing grounding. There is a grounding point on the body of the device. The circuit provides an RCD that turns off the device in the event of a malfunction and microleaks in the network.

The setting of the temperature regime must be carried out in accordance with the instructions for connecting the device.

Maintenance and repair of water heaters Termeks

During the operation of the apparatus, salt deposits gradually appear on the heating elements, which impede heat transfer. Despite the filter installed at the feed water inlet, sediment gradually accumulates on the walls of the inner flask. Relays and sensors fail. Signs of need for repair:

• water heats up for a long time;
• there are extraneous sounds inside the tank;
• frequent switching on followed by protection operation;
• the quality of the outlet water has changed;
• the device does not heat up the water.

Work on replacement and cleaning of heating elements, flushing of the tank can be done independently. In case of failure of the control unit, adjustment is required in a specialized center.

If the family is more than three people, there is no hot water supply, the installation of an electric storage water heater will be the best way out in a country house.

Before repairs of any complexity, it is necessary to de-energize the equipment. Free the tank from water by draining it through the tap, with air supply to displace the liquid from the flask.

Work on replacing thermoelements or cleaning them from scale is carried out on a dismantled and inverted tank. It is necessary to photograph the wiring diagram for its subsequent restoration. Dismantle heating elements for cleaning or replacement.

If a replacement is required, you need to know that the heating element for the Termes water heater is used in accordance with the model brand and instructions. In most models of water heaters, two heating elements are installed, the same number of magnesium anodes should be in a single set. When installing the heating element in place, it is necessary to avoid skewing. All gaskets or gaskets must be clean and the flange is fastened in a cross pattern.

Every year, and when using water of increased hardness, it is necessary to drain the tank more often and not only the heating elements, but also the bottom of the tank, should be cleaned of sediment.If scale has covered the boiler walls, it creates an additional insulating layer without interfering with the heating process. The removed but serviceable element should be descaled and the condition of the anode should be checked with its possible replacement.

Cleaning of electrodes is carried out using Antiscale and similar household chemicals.

A magnesium anode is installed in the system to protect the heating element from corrosion. Loose oxide sediment reduces heat transfer and leads to energy waste. The anode can be changed in case of wear.

Heating elements for the Termeks water heater are of various designs, differ in the material of manufacture, the method of fastening. The casings of branded products are made of steel or copper.

Repair of the water heater in other cases is carried out in the service center using branded spare parts for the Termeks water heater.

Examples of boilers Termeks

All supplied devices are designed for a mains voltage of 220 V, the excess pressure in the main water pipe is more than 0.5 ATI. Consider the most popular broiler models used in everyday life.

Thermex water heater with a volume of 80 liters

For a family of three or more people, the best water heater will be a device with an internal tank volume of 80 liters "Termex". The volumetric tank maintains temperature for 9 hours. The models have different shapes and locations, are compact and can be easily integrated into the allotted space. It is recommended to choose a device with a heating element in the form of a heating element, the spiral will fail faster. Before installing the 80 liter Termex water heater, read the instructions for use of the device, the conditions for safe operation.

Item 3 lists the equipment delivery set, including connection elements. It is necessary to check the completeness in accordance with the specification before purchasing.

The buyer needs to know that the warranty period for the electronic and electrical parts on all Termex products is 1 year. But the mechanics are designed for months of trouble-free operation. The price of a water heater of 80 liters depends on the materials and equipment used. The use of electronic control with multilevel process regulation will make the model much more expensive. The more complex the shape of the model, the higher the device scores. The product becomes significantly more expensive if a tank made of special austenitic steel is used instead of enameling the inner surface.

The device is based on a physical process associated with the occurrence of stray currents, electrochemical corrosion, possible water hammer, wear of gaskets. DIY repair of the Termex 80 water heater is allowed only for cleaning and replacing heaters. A professional can set up the automation and electronics correctly.

Selecting a water heater 50 liters

A small container can be installed even in a confined space. 50 liters of water is enough for 1-2 consumers. You should pay attention to the Thermex ER 50 V water heater. These models are the leaders in demand. A heater power of 1.5 kW will not create a high mains load. Heating water for 1 hour 45 minutes. The steel tank is covered with bioglass porcelain enamel and maintains the quality of the water as in a ceramic vessel. The tank is guaranteed for 7 years. Retail price 6757 rubles.

The Thermex IF 50 V water heater is more complex. It has a metal tank made of stainless austenitic steel and two heating elements. In total, they give a power of 2 kW, but the electronic control system allows you to connect one element, depending on the task on the display. The price of the Termeks water heater is 50 liters of this design, 11259 rubles.

Model with a volume of 30 liters

Miniature water heater Termeks 30 is presented by the company in various designs. There are models with an enamel cistern and an eternal Japanese stainless steel vessel. The outer casing can be plastic or metal, coated with durable paint. Devices with heating elements 0.7, 1.3, 2.0 kW are installed on different models.It is easy to find a device that creates a small load on old networks. For one person, water is enough, a new portion is heated within an hour. The service life of the installations is at least 10 years, with timely cleaning and replacement of electrodes.

Even a small boiler is more economical than a running water heater, which requires a separate wiring. FROM installation of a boiler the quality of life in a rural or country house will improve. When choosing a device, it is necessary to take into account the state of the electrical network, the number of users. The more powerful the device, the faster the water will heat up, but one amount of energy will be consumed.

Thermex boiler review - video