Varieties of hammock models for bathing newborns

To help a new mother, manufacturers offer a special hammock for bathing newborns. It allows you to make this process as safe and comfortable as possible for both. The likelihood of accidents is minimized, since the little body is fixed on a special fabric support. The kid calmly lies on such a device, getting a lot of pleasure from the gentle caresses of water and mother. In order for this thing to be truly in demand, you should consider the nuances of its choice.

The presence of such a support device does not guarantee absolute safety. Therefore, you cannot leave the baby unattended in the bath. In addition, you still need to support its head and back.

Read also our article: homemade fabric hammock!

Varieties of models

Hammocks for newborns differ in both the shape and texture of the canvas. They are often made from hypoallergenic and environmentally friendly products. Models of bright, saturated colors look very impressive. Manufacturers pay special attention to the selection of materials:

1. A very durable fabric is chosen as the basis, but still quite soft and delicate. Then, upon contact with wet skin, it will not rub.
2. Special inserts for fixing the baby's head and bottom are made of elastic but airy materials. The polyurethane support elements keep the helpless baby on the water without any problems.
3. There can be from 3 to 6 fastening hooks or wide elastic bands. The photo shows samples of a hammock for bathing newborns, which are attached over the side of the bath in different ways. It should be noted that in some models the size of the fabric sagging is adjustable. It is enough just to wind or unwind the required stock of material.

Experts advise purchasing hammocks with a mesh base. The porous fabric allows the liquid to pass through and provides full bathing for the baby. During such water procedures, the underside of the product can be loosened or removed altogether. This is done already when the child grows up a little in order to develop his legs and joints.

A very popular model in the form of a hammock slide for bathing newborns, which is made of a metal or plastic frame. It is covered with a dense fabric with a thin foam layer. There are special ballast pads in the head and pelvis area. This structure is installed on the bottom, serving as a support for the baby. Moreover, it has a certain angle of inclination that simulates descent.

Fabric products tend to stretch when in constant contact with water. It is important to check the tension of the wet material before use. As a result, the baby does not dive very deeply under the water.

Tips for choosing

In such a responsible business, you need to pay special attention to details. When buying products, you should check the reliability of the fasteners, as well as the strength of the fabric. A sharp and unpleasant smell should not come from the canvas. You should also check the quality of the seams. Protruding threads indicate poor quality of the product. When choosing, it is important to consider:

1. The degree of tension. The material sags easily and without large gaps on the sides. With the correct installation of the hammock in the bath, it will not reach the bottom, because it is extremely dangerous for newborns.
2. Support device dimensions.You don't need to buy such things to grow. As a result, this will create discomfort for both mother and baby. The stock should be from 5 to 10 cm.
3. The cloth. Rough seams, puffs and bulky parts will chafe the baby's delicate skin. The texture of the material should be soft but strong. For children with low weight, models with a mesh base are suitable. Real heroes should buy more durable samples from dense fabric, because the elastic mesh sags heavily under body weight.
4. Fixture processing. This part of the hammock for bathing newborns must be made very well. For this, manufacturers use additional inserts near the staples and thick threads. The edges are sewn with several lines.

After use, the item must be washed. Before the next water treatment, it should dry thoroughly so as not to become a breeding ground for mold.

Since now the baths are of non-standard sizes, you need to buy models with the ability to adjust the tension. This will allow the mother to fix the product, taking into account the weight of the crumbs and the dimensions of the font.

DIY hammock

Millions of moms prefer homemade hammocks for baths, because they consider them a more economical option for bathing their newborns. You can make such a charm in several stages:

1. Pick up a dense and high quality fabric, as well as metal staples. Find strong multi-layer threads.
2. Sketch a sketch of the future product. You can designate inserts from other materials.
3. Calculate sizes. It is worth starting from the dimensions of the bath. Add 1.5-2 cm for each seam.
4. Make 2 patterns if this is a combined option. One will go to the inserts, and the other will go directly to the product.
5. The allowance for fastening hooks is increased to 5 cm. When processing, this edge must be bent and sewn. Then attach the staples, bend back, and then make about 6 lines. This is for reliability.
6. Carefully sew the inserts onto the finished product. In the area of ​​the head, you can put a layer of foam rubber or synthetic winterizer.

Overlock the edges of the seams. It is advised to hide these unsightly cuts with a bias tape made of waterproof fabric.

Sleight of hand combined with female intuition and a hammock for bathing newborns is ready. In the manufacture and selection of such things, scrupulousness and a responsible approach are important.