How to choose pumping stations for a summer residence - the main criteria

Manufacturers offer pumping stations for summer cottages in a large assortment in terms of design and cost. The equipment is selected for certain operating conditions. The task of the summer resident is to choose and mount the installation in the country correctly. The composition of the family and the specifics of the household should be taken into account.

Related article:pumping station for a private house!

What to consider when choosing equipment

If in doubt, which is better, a pump or a pumping station for a summer residence - then here are the arguments in favor of the station:

• any pump first pumps water into a container, the same battery;
• if you do not have a container, the pump will have to be turned on constantly, even to get a glass of water;
• the water source may be temporarily unavailable, but there will be water in the battery;
• station - a compact block of water supply, maintaining pressure in the system with the necessary protection and control devices.

Definitely, a station is better than a pump, but to choose a device, you need to follow the advice of specialists. In this case, it is necessary to know the initial parameters according to demand per hour, the depth of occurrence and the distance to which the water is supplied or the height of rise.

The passport data of the pumping station for the summer residence indicate the maximum parameters, and the workers, taking into account the resistance in the pipes, will be one third lower. For household installations, the power should be 0.6 - 1.5 kW. There are mini stations that consume from 0.3 kW / hour.

The material of manufacture affects the reliability of the installation and its cost. But even plastic products with careful handling can withstand several seasons of operation. Less noisy products with a cast iron body.

The availability of additional automation and protection units affects the reliability and trouble-free operation of the system. The presence of relays, sensors, RCDs creates safety and maintains parameters, signals deviations. Filters ensure that clean liquid enters the working chamber, and the check valve always keeps the suction pipe under the fill.

Which pumping station to choose for a summer residence depends on the type of source. If water is pumped from an open reservoir or a well, NS with a surface-type self-priming mechanism are suitable up to a depth of 9 meters. Moreover, they may be ejector or not. The level of noise generated by the pump depends on the way the water rises.

For extraction from deep wells, submersible or borehole pumps... The more powerful the submersible pump, the deeper it will extract water.

When choosing between a pump with a remote ejector and a downhole pump, the second one should be preferred. The remote ejector creates many problems during operation and installation, but it can lift water from a depth of 45 m.

Pumping stations for water supply at home and summer cottages can be equipped with multistage pumps. Such units operate with low noise, have high efficiency and are suitable for indoor installation. However, before starting the equipment into operation, it is necessary to pour water into the suction pipe. The cost of such NS is high.

In addition to the accumulator tank, household pumping stations in the country are equipped with an additional storage device. This is important as watering plants with cold water is harmful. Therefore, the accumulator can be small, which will reduce installation costs. But if there are many sources of parsing in the house, the built-in capacity is needed more.

When choosing a hydraulic accumulator, you need to decide on the installation site pump... Often there is not enough space in a cramped pit or utility block; you have to choose a model in accordance with the size of the chamber.

A mini pumping station for summer cottages is used to supply water to small families. They often represent a fully automated device, have an expansion tank. Mini NS are represented by Russian-Chinese units LEO and Vodotok.

The choice of an NS is a responsible matter, it is required to take into account whether seasonal or year-round use of the installation is planned. Winter operation will require special insulation of pipes and equipment during installation. It is important to choose a reliable model, renovations are sometimes comparable to buying a new station.

The pumping stations recognized as the best

How to choose a pumping station for a summer residence so as not to have problems? To help the consumer, a rating of the best models in demand among buyers is presented. Some examples can be found:

1. The Marina APM 100/25 pumping station is made in Italy. Designed to lift water from a depth of 25 meters. The body is cast iron, reliable. Power consumption 1.1 kW. HC productivity is 2400 l / h. The minimum installation cost is 12 thousand rubles.
2. НС Gardena 4000/5 Classic is used in the country, in a private house. It has a good performance - 3600 l / h, with a power of 0.85 kW and costs 9 thousand rubles. For summer residents with year-round living - an ideal option.
3. The famous Italian company Grundfos has proposed the JP 2 PT. The NS will lift 3000 l / h from a depth of 8 m, consuming 720 watts of energy. However, the station is recommended for use in temperate climates and for operation "on arrival". The installation costs 8 thousand rubles.
4. Domestic Jilex Jumbo series installations from mini to powerful. DOM is constantly noted in the ratings of pumping stations for summer cottages. They are equipped with a built-in ejector, have different performance and the volume of the membrane accumulator tank. Installations cost from 3.6 to 12.9 thousand rubles, depending on the capacity and configuration.
5. AL-KO HWA 1300 F will help to raise water from wells about 50 m deep. As can be seen from the marking, the power of the installation is 1300 W. It is designed to water and maintain pressure in a system with a large number of parsing points. The model costs 7300 rubles.
6. An expensive model from the famous German manufacturer Karcher BP 4 Home & Garden is distinguished by reliable multi-level automation. Productivity 3800 l / h with an extraction from the horizon of 8 m provides the need for internal needs and irrigation of the site. The equipment costs 11 thousand rubles.
7. NS "Aquarebot", installation designed for deep wells with low flow rates. Its capacity is 0, 245 kW, it costs 3.5 thousand.
8. The Whirlwind pumping station, model ASV-800/24, can lift water from 9 m, but is more often used for pumping when irrigating a plot of up to 1 hectare. The power of the installation is 0.8 kW, the cost is 4.7 thousand rubles. Difference from other models - it can work without overheating at an ambient temperature of +50⁰ FROM.
9. The Belarusian pumping station for a well at the BELAMOS XK 08ALL dacha has a universal purpose. It can be used as a booster, not only when pumping water, but also for chemical reagents, fertilizer mixtures. The power of the installation is 0.8 kW, the productivity is 3600 l / h, the cost is 4.9 thousand rubles.
10. In difficult operating conditions, the Wilo Jet HWJ 203 mini station with a 50 liter tank is considered indispensable. It lifts water from 42 m, ideal for work in difficult climatic conditions. The station costs 13 thousand rubles.

The result of the information should be an understanding of how a pumping station for a summer residence works, and which one to choose:

• an installation is needed for autonomous supply and maintenance of pressure - domestic inexpensive NS will cope with the task;
• if the operating conditions are difficult, increased reliability is required - Karcher, Wilo, Grundfos are at your service;
• Jumbo, AL-KO HWA stations operate without problems under normal conditions.

Operating conditions of pumping stations

Pumping stations with surface pumps should be installed in a protected from precipitation room, shed, chamber. At the same time, for winter operation, the entire supply line and the station itself must be protected from freezing. For seasonal living, the system is dismantled and completely freed from residual moisture. The pump is stored in a heated room.

The pump must be firmly anchored to a monolithic pallet. Vibration is the main enemy of the system. Submersible diaphragm pumps should not touch the walls of the chamber during operation, transmitting vibration to them.

To connect a wiring system and provide sockets for devices, you should use a herringbone water manifold by cutting it into the root of the main line.

Connected to taps:

• hydroaccumulator:
• pressure switch;
• pressure gauge.

Each station has an instruction manual. All manipulations must be carried out in accordance with the manufacturer's recommendations. And then the pumping station for a well in the country will last a long time.

Pumping station for a summer residence - video