Pump Trickle - assistant summer resident

Country life without a well-functioning water supply system is unthinkable. A simple and trouble-free pump Trickle will provide water supply from a well and an open reservoir. All inexpensive low-power pumps used in the country are produced in Russia or in the post-Soviet space. The pumps are vibrating, do not have rotating parts, their service life is long, and repairs are simple.

Pump manufacturers Trickle and Malysh, their modifications

Before you buy a trickle pump, you need to familiarize yourself with the documentation, find out who the manufacturer is. In contrast to the legal apparatus, the documentation on the replica is poorly compiled, the design is different. Buyers of fakes leave negative reviews on the equipment:

1. Initially, 40 years ago, the production of vibration pumps was mastered in Belarus, in Lipetsk, where the Olsa company still operates. The Trickle device is indispensable for installation in wells, due to the cylindrical body.
2. In Russia, submersible pumps Rucheek Topol model are produced in Bryansk, Chelyabinsk. The Zubr company, a well-known manufacturer of chain saws, has also mastered the production of pumps.
3. The Malysh pump - a model with an upper water intake is produced in Klimovsk MO, Livny in the Oryol region, Bavleni in the Vladimir region.
4. A pump with a lower intake is called Kid M, made in Klimovsk and Livny.

Power units for all vibration pumps Malysh, Rucheek are supplied from the Belarusian city of Mogilev.

You can identify the manufacturer by the address and name of the company. The passport lists the items of warranty service.

A cast nameplate with passport data is always attached to the pump housing. Chinese devices do not have such documentation, are unreliable, break down in the first weeks of operation.

Technical Description, Models of Low Power Vibration Pumps

Vibratory pumps have a simple design with no rotating assemblies. The diaphragm pumping mechanism is powered by an electromagnet connected to an alternating current line with a frequency of 50 Hz. The core of the electromagnet transmits vibrations, at a rate of 100 times / second, to the pin, which causes the membrane to vibrate.

The membrane is the wall of the water chamber. The chamber has an opening for suction of water and a discharge pipe. When the chamber expands, water is drawn in, then the check valve closes, and the liquid is squeezed out into the discharge pipe. And so 100 times a second. The user feels the vibration of the housing, for which the pump is called vibration.

It is possible to increase or decrease the pump performance by adjusting the vibration amplitude, that is, the length of the pins driven by the core. For amortization, the joints are made with rubber products. With intensive work, they wear out and the cuffs need to be replaced.

There are models with upper and lower water intake. At the same time, the upper fence provides good thermal protection to the energy system, and the lower one allows the system to be used when cleaning pits at a low water level.

The basic models of the Trickle pumps did not have overheating protection. Now any vibration pumps have a dry run and overheating lock. At the bottom water intake at the hole, a filter must be installed to protect it from sand, which is easy to replace.

Malysh M pumps have an upper water intake, Malysh-3 - a lower one, and Malysh-K is used as a drain. The pump overheats during operation for more than 2 hours. The break should be at least 20 minutes.

Belarusian vibrating pumps Trickle are produced with upper and lower water intake. There are many modifications. Depending on the location of the suction, the brands Trickle B 10 - 40 (the number is the length of the supply cable), Trickle N 10 - 40 are produced. Submersible pumps work in wells and wells.

Technopribor Corporation manufactures pumps Rucheek-1 with an upper intake of water and a Rucheik 1M with a lower intake. The devices are equipped with circuit breakers and comply with safety standards.

Technical indicators of pumps Trickle

Of the vibrating devices, the Brook is superior to other pumps in terms of performance. The pump is adapted to work in wells and wells, it is lowered to swing pools, flooded pits.

The characteristics of the Trickle pump indicated in the passport:

• power consumption - 225 W;
• maximum liquid lifting depth - 80 m;
• head / flow rate - 20 m / 950 l / h, 30 l / 720 l / h, 40 m / 430 l / h;
• dimensions - height 300 mm, diameter 99 mm;
• the cable length corresponds to the numbers in the marking.

The general assembly of the submersible pump is made with sealant. For contactless work with the borehole walls, shock-absorbing rings are used.

The apparatus is lowered into the depth on a nylon cable. The electric magnet in the housing must always be under the bay for water cooling.

Do not use metal rope or wire for descent. The metal does not dampen vibration, the casing or the wire itself may be destroyed.

Advantages of membrane devices

The choice of low-power pumps, operating only in the warm season, is justified for giving:

• the device is easy to maintain, maintainable and reliable;
• water, in contact with electromagnetic waves and is beneficial to use;
• the low price of the Trickle pump is due to production in the CIS, the absence of customs duties;
• Diaphragm pumps are guaranteed for 30 months if used correctly.

Pumps Kid, A brook of all modifications can be bought anywhere in the country. The device is ordered on the manufacturer's website. Delivery is carried out to the doorstep.

The Trickle pump operates at a voltage of 220 V and is adapted to the conditions of domestic power supply. The Baby device should be connected only through a stabilizer. A short-term peak of 240 V will damage the magnet winding.

Pump equipment

The outlet hose should not have a small cross-section; additional load leads to the failure of the device. For connection, use polymer or rubber hoses. If water is supplied to the pipeline, the connection to the pump is carried out with a hose at least 2 meters long.

The cable for lowering the pump in depth must be nylon, attached to the lugs, according to the instructions. This is important, if the insulation of the electrical cable is broken, the pump is lifted using a non-conductive cable.

For pumps with a bottom intake, filters and thermostats must be used.

Features of using the Trickle pump - video