Overview of hand drills from different manufacturers

A hand drill is an indispensable tool for repairs. Today on the power tool market there are drills with different functionality. Manufacturers produce electric drills of various capacities. Some tools are designed for cosmetic repairs. They are used when working with drywall or thin wooden beams. These drills are usually battery powered and do not require an electrical connection. The disadvantage of such tools is their low power, as well as a short battery life.

Power tool manufacturers also produce drills for heavy work. They are equipped with a powerful electric motor and a two-stage gearbox. Such tools only work from the mains. Consider electric drills from different manufacturers and their functional differences.

Drill Interskol D-11/540 T

The advantage of the Interskol D-11/540 T drill is its compactness. The tool is specially designed for one-handed operation. The electric drill is equipped with a two-sleeve removable chuck. The handle of the electric drill is rubberized. The tool is ergonomic, there is a convenient protrusion on the body, which helps to hold the drill firmly even with three fingers. A soft-start switch is located under the ledge. The pressing force allows you to adjust the rotation speed of the chuck. The drill is single speed and is equipped with a 540 W motor. The number of revolutions per minute is 2800. The maximum drilling diameter for metal is 13 mm, and for wood - 25 mm.

Drill EWiG VD 710

The EWIG VD 710 drill is a tool designed for both smooth and hammer drilling. On the top panel of the case, there is a brush switch for percussion-smooth drilling. The set of the drill includes an additional front handle, a key single-cartridge chuck with a key for removing and installing it and a stop with a ruler applied on it. The drill, for its compact size, is very powerful. The rotational speed is 2900 rpm. Engine power - 710 W. The maximum drilling diameter for metal is 13 mm and for wood is 35 mm.

Drill Bosch GSB 21-2 RCT

Electric drill Bosch The GSB 21-2 RCT comes with an ergonomic front handle. The rear handle of the drill is rubberized. The tool is equipped with electronics, which allows you to use it like a screwdriver. The drill is equipped with mechanical and electronic breakage protection. When the drill is jammed, the gearbox protection is triggered, and when the engine heats up, the electronic system stops the tool. Engine power 1300 W. The rotational speed at the first speed is 900 rpm, at the second - 3000 rpm. Maximum drilling diameter for metal 16 mm.