We buy a bulk water heater for a summer residence with a heater
Country life, in addition to the mass of positive emotions, carries the inconvenience associated with the lack of hot water at any time. If the drinking water is delivered in cylinders, and the water in the water supply system happens by the hour, it remains to buy a heater for giving a bulk one with a heater. Once the washstand was just equipped with a tap and a heating element, that's the whole device.
More on the topic:instantaneous electric water heater for shower!
Varieties of bulk heating tanks
- aesthetic design;
- water level indicator;
- heating thermostat;
- blocking from "dry start".
Depending on the place of installation, the tank can be hinged, or made complete with a sink and a tank for draining, a kind washbasin Moidodyr with heater.
For household needs, hygiene procedures, a larger tank can be installed on an elevation, then the water is supplied under pressure, allowing you to use the shower.
Despite its seeming simplicity, the device requires the organization of safe operation, the possibility of emptying and convenient filling. Since the heater is electric, it has a separate outlet located in the immediate vicinity and having a splash-proof design. The accumulator tank is filled with power off. The best material for a heater for giving a bulk tank with a heater is considered to be plastic, it does not conduct electric current, absorbs noise and keeps heat for a long time.
In order to save electrical energy, you can get water at a comfortable temperature from a container installed outdoors on a clear sunny day. To do this, the tank must be painted with black paint and not have a heat-insulating layer. From above, the water is covered with a transparent film or glass. In inclement weather, the water is heated by electricity.
Metal devices are more expensive, but they are more resistant to temperature changes and winter storage in a room with a deep minus. A stainless steel heater will last for many years if it does not fall prey to vandals in an unguarded area. An additional advantage of a stainless steel bulk water heater will be the absence of rust in the water even after a week of absence of the owners in the country. The same property of neutrality with respect to water and dissolved oxygen has polymers for the manufacture of dishes.
To solve the household needs of weekend summer residents, you will need:
- washbasin with tap and sink;
- shower equipped with a cistern with natural or forced heating.
Water heater device
The design of a prefabricated electric bulk water heater for a summer residence is thought out to the smallest detail:
- The water from the bucket is not poured into the tank, it passes through a separate pocket of the damper and fills the tank according to the principle of communicating vessels.
- The tank has an inner and outer contour, with an air gap between them. Foam insulation can be used instead of air.
- The level of water heating in the tank to a comfortable level is regulated by the built-in thermostat.
- The drain level is located above the heating elements, leaving them always under water.
- An indicator is provided to indicate that Heating element included in the supply network and in working order.
The described device design water heater the bulkhead for the dacha belongs to the device from the Alvin company, but this is the most rational design, which should be guided by.
Such a domestic heater is used for washing dishes and as a washstand. It is not difficult to make an electric heater for a summer cottage with a shower. The tank must be larger and must be installed with a pressure drain.
A flat bulk water heater with a shower can be installed on the ceiling under the roof, water is poured into it with an ordinary country hose. The device practically does not take up space, it can be equipped with a secluded corner hidden from the eyes. The square tank is equipped with protection devices, a 2 kW heating element is used. In principle, you can use a less powerful heater, it is unlikely that in the summer you will need water with a temperature of 600 FROM.
Alvin's company offers its own solution to the dacha problem. Inexpensive and aesthetic water heater Alvin with a shower with a volume of 20 liters is designed as a thermos, the water in it does not cool for a long time. It will not be difficult to remove the shower liner, and the container will become suitable as a washstand. In the model EVBO-20/2, a heating element with a power of 1.2 kW is used, there is a built-in accumulator and a pump to create pressure in the hose when taking a shower. The cost of the device is 7.2 thousand rubles.
DIY heater
A heater for giving a bulkhead with an electric heater can be made by hand, or you can buy one made according to all heat engineering calculations, equipped with sensors and relays. Such devices are inexpensive, have a good heating element and a well-thought-out design. Alternatively, a container under water with a lid and a tap will look something like this. Of the many devices, it is this one that a craftsman can make.
Bulk water heater for summer cottages and for a rural house is made of galvanized sheet. Washbasin "Arktika" is designed for 15 liters of water and is not complicated in execution.
It is safe to use the shower when the heater is off. Water is a good conductor of energy; damage to the heater can result in electric shock.
The first step is to find a suitable inner tank made of heat-resistant plastic or metal with a comfortable wide mouth. In this case, the plastic must be food grade, and the metal must be resistant to oxidation.
You will need a faucet with a fence tube and sealing connections to it. It is not difficult to purchase a heating element with a built-in thermostat to set a comfortable temperature.
The hardest part in creating tap and heater tapes will be making strong connections. Welding can be used in a metal tank, for a plastic container you need to cut a hole for a 16 mm tap, and put a squeegee on it, onto which a nut is screwed from the inside through gaskets and washers from both sides, outside the tap. In the same way, a seal is created for the heating element, only the hole is required for an inch and a quarter or 40 mm.
For a heater, you first need to install a coupling, and put a heating element into it with the installation of seals. Before installing the heater, connect the wires and plugs so that the structure can be powered. After installing the valve and heating equipment, it is necessary to check the tightness of the installation with a full tank.
The installation of a plastic vessel can be done using a metal frame. Having made suspensions, they should be covered with insulating material so that the water remains hot for a long time. It can be polyurethane foam applied in several layers.
For an aesthetic appearance and durability, the entire structure should be clothed with a metal body made of plain, polished or galvanized sheet. Plain tin must be painted on top so that corrosion in 2 years does not eat up the beauty.By the same principle, you can make a DIY water heater for a shower.