How to make vertical flower beds with your own hands?

The phrase "vertical flower bed" sounds somewhat unusual. But if you understand the peculiarities of this word, which is gaining popularity, then, undoubtedly, new horizons of landscaping their own estates will open up for every gardener, because vertical flower beds are understood as various structures extended upward: arches, columns and wall paintings made of plants, screens and pyramids.

Originally from Babylon

Today, vertical flower beds are a real trend in garden design, appreciated by the owners of small plots, where every meter counts, spacious estates and even houses. An unusual view of landscaping allows you to arrange a real garden where there is room, perhaps, for a flower pot.

However, do not consider vertical gardening to be something new. The Babylonians became famous for their hanging gardens two thousand years ago. And gardeners owe the second birth of an unusual way of decorating space to a true devotee of vertical gardens, Patrick Blanc. The French garden designer has become famous for living houses like this museum in Paris.

Photos of vertical flower beds from this master are simply amazing, and it may seem that very few people are able to create something like this in an ordinary garden plot. However, this opinion is deeply mistaken. To equip even not such a grandiose, but equally beautiful flower bed is within the power of everyone, especially since this is a simple matter and does not require special expenses.

How to make a vertical flower bed in the country?

In addition to wall placement of vertical flower beds, there are many options for their arrangement and on the ground. Such flower beds take up little space and can become a bright element of the decor of any garden, cover up an unsightly area, disguise a blank wall or fence.

The advantages of vertical flower beds:

• The variety of forms and their compactness allow even landscaping a balcony.
• Simplicity of the device and care.
• The separation from the soil level prevents many pests from accessing plants.

Disadvantages:

• Due to the small amount of soil, plants need regular feeding.
• Such plantings often freeze, so structures should be insulated, cleaned for the winter in warmth, or frost-resistant annuals should be planted in vertical beds.
• Vertical planting needs frequent watering.

There are two ways to prevent a lack of moisture:

1. hydrogel, which is introduced into the soil, where the plants are planted.
2. drip irrigation device
   ... This is the most effective method, but due to its high cost, it is only justified on large facilities.

Vertical flower beds from bottles

One of the most popular and democratic methods of the device involves the use of simple plastic bottles. Before starting to create a flower bed, the bottles should be thoroughly washed and all labels removed from them, and the lid is loosely wrapped so that when excess moisture appears, it can drain through an impromptu drainage hole.

• The prepared bottle is cut in half.
• A rope or wire attachment is made on the top of the bottle.
• Prepared soil is poured into the upper part with a lid and seedlings are planted.
• A plastic container with a plant is placed in the bottom of the bottle and the structure is attached to the surface to be decorated.

In a similar way, from any pots, cans, other home-made containers and, of course, from bottles, it is easy to create vertical flower beds with your own hands at no special cost and to plant greenery on any vertical plane.

True, on such a structure it is better to make holes from the water drain. And if desired, such unusual containers can be painted with acrylic or aerosol paints.

Production of vertical flower beds from PVC pipes

These beds are good for growing vigorous flowering plants such as petunias or nasturtium. And if desired, strawberries and many green crops are grown on such columns:

• The structure consists of two plastic pipes with drilled holes, seedlings are planted in the outer pipe, and moisture and fertilizers are fed through the inner pipe.
• It is better to wrap the watering pipe with burlap or non-woven material, and close its lower end tightly with foil or tape.
• It is important to carefully strengthen the structure in an upright position.
• Inside the outer pipe, an irrigation pipe is placed, first small expanded clay is poured into the inner space, and after it the soil.
• Plants are planted in the holes on the outer pipe.

An original flower column can also be built from a reinforcing mesh, plastic film or a dense garbage bag reinforced in the planter.

Original vertical flower bed from pots

For growing annual flowers, a vertical flower bed from pots or any other containers at hand is ideal.

The containers are strung on a reinforced base through a drainage hole in a checkerboard pattern.

Vertical flower bed from a bag

This option will require a minimum of investment and time for arranging a flower bed:

• Strong handles or other fasteners are sewn to a dense bag and the container is filled with nutritious soil.
• On one side, cuts are made for planting seedlings, at a distance of about 20 cm.
• The bag is hung out in a permanent place and the plants are planted.

For the reliability of the structure, an insert of film can be made inside the bag, and after filling the bag with earth, quilting it so that the soil does not fall to the bottom.

When making a vertical flower bed with your own hands, instead of a bag, you can take, for example, old, out of fashion bags.

A living wall can be built using non-woven fabric with rows of pockets sewn onto it.

Flower screen made of pipes

Beautiful green screens are obtained from horizontally reinforced drainpipes or heating pipes. The first ones are equipped with side plugs and a solid frame, and the second ones are drilled holes for plants.

Vertical flower bed of car tires

Make it vertical a flowerbed in the country is easy and from old tires... At the same time, the design does not need an additional frame, and different ways of arranging tires make it possible to create flower beds of all kinds of shapes and sizes. And to hide the unsightly black rubber, the tires are painted with harmless acrylic.

A flower bed for a balcony from old pallets

This is an original stylish solution for decorating any balcony, gazebos or patio.

• Unnecessary pallets, wooden or plastic boxes are suitable as a basis.
• On the back of the box is a straw-sealed mesh or non-woven fabric.
• The container is filled with soil in which the seedlings or seeds are planted.

Tips for making a vertical flower bed

When choosing plants for a vertical flower bed, it is important to remember that each of them gets a little nutritious soil.

All species must have similar conditions of detention. Moreover, it is better to give preference to unpretentious plants with a good ability to root. These can be alpine flowers, ivy and bindweed, mosses and stonecrops.

Video - vertical flower beds